Powered by Max Banner Ads 

To learn how to build solar panel systems, you need to follow specific guidelines

To learn how to build solar panel system  at home is not a rocket science as it takes hardly few hours to make and install them. Even though it is a tedious process but you literally start getting energy as soon as you install them over the roof. If you are looking for accurate guidelines on how to build solar panel then you are at right place. Before you start making them acquaint yourself with the basic knowledge of solar systems, their varieties and materials used inside as this will help in future. The best place to do this is internets hence spend few hours reading the information as then you will be clear in mind as what you are going to do. Even though it seems a little boring activity, learning how to build solar panel is really rewarding activity as it helps to cut down the energy bills by almost 70 %. just by using renewable energy

Before learning how to build solar panel you have to assemble the ingredients needed in the procedure. The best place to look for the ingredients listed below is internet as you not only get discounts there but you could also find used solar cells that are way cheaper than original once. You will also need a manual to guide you through connections in pictorial format as it makes sure your step is not getting wrong. Also choose a free space that is at least as big as a room in your house so that you will have comfort in learning how to make solar panels and making it.

How to build solar panel systems using different materials

 Multiple copper sheets or if you don’t find them bring copper wires to make the sheets.
 Burner, stove, gas top anything that will facilitate the melting of materials
 Two heaped spoons of salt
 Bucket of water
 Double alligator clips to attach the panels
 Plastic bottle or any hard plastic
 Sheers (preferably made of metals)
 Glass sheet
Procedure
Step one of how to build solar panel
Firstly if you have purchased a sheet of copper then cut a shape which is as big as a table top to get a rectangular sheet. Make sure you have soft edges which you could do by brushing the corners with sandpaper. If you have wires then you have to melt them and prepare sheet but avoid it because it is pretty daunting.  Next is to place the cut out of copper sheet on the burner and let it burn properly until it changes to black color. Then keep it aside for say twenty minutes and move on to step two.
Step two of how to build a solar panel
Remove the black tint over the sheet again with hands or sand paper and then cut another sheet of copper with same size as this one but it should be raw not burnt. Now insert these sheets in wide mouthed plastic bottle (they will go as these are cringed)
Step three of how to build a solar panel
Attach the copper sheets by alligator clips joining positive side of burned shit with raw sheet and similar to the other end with meter or micro meter. Now add in the salt and water liquid inside the bottle.
This creates your solar cell arrangement which is then covered with glass sheet would complete the how to build solar panel procedure.